Flat-sided dowel pins (mm & inch sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are dowel pins with a one side truncated so they can be printed horizontally for maximum shear/bending strength.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 656
- Wydruki
- 2
- Wyświetlenia
- 1701
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a collection of dowel pins with a one side truncated so they can be printed horizontally for maximum shear/bending strength. I use these all the time for moving parts or multi-part prints so I made python script to crank out pins of all different sizes and lengths. milimeter and inch sizes included, inch sizes are saved to mm-based STL files.
The truncated portion is sized so it starts with a 35 deg overhang so it should print well for most setups. I usually add a lot of perimeters and align infill with direction of the pin for strongest pins. If you need a slightly under/oversized pin I would use the scale factor in your slicer. I set this up to only make pins with L/D between 1.5 and 3. Python file is attached if you need to make some other range of sizes, or if you want to adjust chamfer or flat size.