Montessori Spin-Around Glitter Drum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a copy of Montessori Spin-Around Glitter Drum that I made it for my son to play with.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 1364
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Public Domain
This is a copy of Montessori Spin-Around Glitter Drum that I made it for my son to play with.
Print instructions
The toy was printed on this setup:
Prusa MK3s with MMU2s
Nozzle 0.4mm
Layer height 0.2mm quality
Supports everywhere for the foot 1 and foot 2
Infill Gyroid 10%-15%
Filament:
The base, foot, axle, cylinder, cube with
-Natural Color Clas Ohlson
The sides with
-Blue Prusa
-Yellow Prusa
-Red Prusament
-Orange Prusament
-Grey Prusament
The cube is optional, if you want to print it and drop it inside the cylinder BEFORE you glue it. I've printed 7 cubes and drop them in the cylinder. It makes noise spinning the cylinder enough to keep my kid distracted an motivated to spin it more.
Print the sides with any color and material you like, optionally you can paint the sides or sitck decals with glitter or any images you like on them.
After printing you will have to glue some parts (I used superglue). Glue cylinder part 1 with part 2. All the sides on the cylinder and in the same time, put some glue in the base holes and quick put the axle trought the cylinder and glue the axle in the holes from the foot 1 and foot 2. Make sure that the cylinder is not touching any glue and it has space to spin around.
As any glue process, leave the parts to glue after every step.
Happy Printing<<