Improved Way Cover for Precision Matthews PM25-MV Milling Machine, Z-Axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Z-Axis way cover for the Precision Matthews PM25-MV milling machine. Instead of the factory-original bellows…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 766
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a Z-Axis way cover for the Precision Matthews PM25-MV milling machine. Instead of the factory-original bellows type (which takes up about an inch of precious y-axis motion) this takes up essentially no room and works flawlessly.
There are two STL files for 3d printed parts, each around 10 inches long. There's also a DXF file of the nut plate for the bottom clamp.
The roll down shade can be gotten from a variety of sources, I purchased mine at Lowes, search under "Levolor White Room Darkening Cordless Vinyl Roller Shade". I bought a 36" long unit, cut it down for a 9" wide "shade". Instead of the thin white vinyl I used .032 thick neoprene sheeting that I bought on Amazon. Whole thing cost around $15.
Comments welcome!
Here's a YouTube video of the cover in action:
Print Settings
Printer:
XDrive, 12" cube printer (custom design)
Rafts:
No
Supports:
Yes
Resolution:
Fine
Infill:
60% or more
Notes:
Nothing special to note, other than you'll need to set this up on the diagonal on machines with a smaller bed.
Category: Machine Tools