1 / 11
Filament Spool Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable without supports and used to hold filament spool tight to prevent tangling
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 822
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (20)Powiązane
Use Case: Yes, another filament clip. Designed for 1.75mm filament spools of any size. I wanted a durable clip that could tightly hold my filament spool, without having to remove it each time I loaded a spool onto my printer. Additionally, I wanted a to design a single clip which could hold all materials, thus far I have used it with: PLA, PLA+, PETG, TPU, ABS,
Components:
- Filament Clip
Printing Notes:
- Designed to print without supports.
- Depending on printer, may want to turn on build plate adhesion (skirt or brim) since the walls are thing but the model is about 10mm tall.
- There are four separate holes on the clip which allows you to feed the filament through and hold tension.
- The top hole is angled such that you can feed it through at the bottom and then pull the filament upward toward the narrow channel to hold the filament in place.
Filament(s):
- MakeShaper PLA - Green
- YoraHome Premium PLA Yellow
Printer(s):
- AnkerMake M5 3D Printer