Claw with Drive screw linear actuator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Claw with Drive screw linear actuator. I wanted to leverage by bolt and nut design somehow and this is it.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 561
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a Claw with Drive screw linear actuator. I wanted to leverage by bolt and nut design somehow and this is it.
First part to print is the nut with wings. Then you can print the body and add a print pause or color change to encapsulate the nut in the body. I would recommend adding the print pause before the 2 body pillars come together so that you can slide the nut inside with the flat side down. Print the remaining parts, add a little glue on the back cover and the finger drive.
I used the 0.2mm setting.