Motorized turntable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slow rotation, smooth, motorized, bearings.
- Ocena
- 5 / 5
- Polubienia
- 171
- Pobrania
- 652
- Wydruki
- 11
- Wyświetlenia
- 4122
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
3D Printable motorized turntable.
Check out the full build video here: https://youtu.be/OTC3A-28yWQ
IMPORTANT: Make sure to buy a motor rated for the correct voltage based on where you live. You can get the motor(s) here: https://amzn.to/421AvTn
As an Amazon Associate I earn from qualifying purchases. All product links are Amazon affiliate links.
*Other parts required for this build: (Affiliate links)
3D Printer Filament: https://amzn.to/3JbtZ3N
Skateboard bearings (608): https://amzn.to/3Le8C4o
Cable with switch: https://amzn.to/3ZHKz1Y
M3 Screws and nuts: https://amzn.to/3LhyLz6
If you don't have a 3D printer, you need that as well!
https://amzn.to/3Jw22nx
FOR YOUR OWN SAFETY: Be careful not to touch the power connectors while the cable is plugged into the wall, make sure to isolate them properly with heat shrink or electrical tape, and DO NOT plug in the power cable until the project is fully assembled.