Print-in-place Empty Tomb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A print-in-place model of an empty tomb with captive rolling stone to serve as a conversation piece about resurrection.
- Ocena
- 3 / 5
- Polubienia
- 37
- Pobrania
- 171
- Wydruki
- 2
- Wyświetlenia
- 1172
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial
In light of the coming Good Friday and Resurrection Sunday, I thought I'd release this print-in-place model that I designed of an empty tomb so that it can be a conversation piece about resurrection.
The rolling stone is held captive (ie. it won't fall out) due to the design but its rolling movement should be smooth enough even around the corner with the loose tolerances I put in for the curved slot on which it rolls.
I've also attached the Prusa Mini gcode I used to print out the make you see in the photos; a very hollow print out with 15% lightning infill which I feel is quite appropriate for an empty tomb.
I printed with Prusament Marble Grey PLA.