Slap-Dice Dice Holder & Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular dice holder that also functions as a dice roller. Load the tubes with dice, then slap the back to shoot them out
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
This was designed for the D&D dice challenge!
Dice tubes can hold up to 2 dice. Slot them into one of the middle holder's hexagonal holes and slap the end to shoot any dice out.
To store and transport, first attach front cover to the side with circular holes then attach back cover to the side with hexagonal holes. Use the handles in the middle section to carry/use as feet!
All models are pre-oriented, only the tube and middle holder with handles require supports. Tube can be printed with build-plate only supports.
Reach out if tolerances are too large/small, I tested them only using my printers
Settings:
10% infill
.15-.20mm
although using adaptive layer height can make the middle holder's handles turn out great!