Seed storage box for seed packets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for your seed packets and sticks/pens for when planting
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 225
- Wydruki
- 0
- Wyświetlenia
- 1354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Dimensions:
21cm x 10.6cm x 6.3cm(height)
Every storage compartment is 10cm wide and 2 cm deep. The walls are 6cm tall on all sides. (except for the bottom one, which has a half-height wall in the middle.)
The “top”-compartment is divided into three separate compartments to hold your nick-nacks eg. pens, popsicle sticks for labelling.
Print Settings
As this is a big print, I used low infill and walls.
Printer:
Creality Ender 3 S1 Pro
Wall thickness:
1
Bottom layer thickness:
2
Top layer thickness:
3
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
10%
Plastic used:
about 195g
Notes:
Could probably go lower for infill, but it does not do much in terms of print time.
Printed with 0.4mm nozzle in 14,5h