minimalistic dice tube (vase mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tube with cap for 6 dice or DnD dice set.
- Ocena
- 5 / 5
- Polubienia
- 129
- Pobrania
- 365
- Wydruki
- 13
- Wyświetlenia
- 1322
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
While designing my other dice tube, I wanted to make an even simpler and smaller one for some other dice, so I came up with this design.
It's a simple tube for 6 normal dice; inner diameter is 21mm. Takes only 6.5g filament, and about half an hour to print (depending on print settings). There are 2 holes in the cap for some (para)cord. The helical pattern is for rigidity.
Scale up for bigger dice.
Update: Added bigger tube for DnD dice set.
Update: Added tubes with different patterns.
Printing:
- vase mode, 4 bottom layers, 0.2mm layer height
- optional: I tend to set the cap's layer height to 0.17mm
- advanced → extrusion width → external perimeters: 0.6mm
- works with 0.4mm and 0.6mm nozzle
- for faster prints: filament settings → cooling → slow down if layer print time is below: I used 3 seconds with my MINI. YMMV.
You can print tube and cap in one go:
- add cap first, then tube, so they are printed in that order
- place cap front left and tube back right on the print bed
- print settings → output options → complete individual objects
I added a gcode file for the Mini.