Towel hanger for suction cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is based on mkfloria's design: Towel Horse.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
This is based on mkfloria's design: Towel Horse.
I wanted to incorporate that design into the suction-cup hooks that I have. They have a pump/vacuum action when you pull the hook down. I thought I could substitute the hook for a more suitable appendage (no offense to pirates).
The hook is held to the base with a pin that can be removed carefully; it only goes one way and you don't want to l lose it or damage it as you'll need it to assemble it again with the towel holder.
It should be pretty straight forward to assemble, but if not, there's a couple of pictures.
Print instructions
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 30%
Notes:
- 4 perimeters should give a sturdy holder and not require infill in the holder part.