CatYarn Spool Brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Brace To Prevent Cardboard Spools Potentially Failing When Being Dried, Designed For CatYarn Spools
- Ocena
- 4,857 / 5
- Polubienia
- 27
- Pobrania
- 96
- Wydruki
- 8
- Wyświetlenia
- 655
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Overview
The adhesive used to keep cardboard spools together isn't rated to go above 50C, so for peace of mind when drying and/or just using cardboard spools, I created this brace.
After printing, you'll want to screw the parts together and apart a few times to make the threads wear in.
Also, incase it isn't obvious, you'll want to print this in a fairly high temp resistant material like ABS/ASA/PC or it'll also melt like the glue when you're drying the spools
Known to work with the following spools:
- CatYarn (duh)
- Overture
- Sparta3D
Change Log:
03.04.23 - Fixed weird chamfer on CatYarn Spool Brace Nut