V6 Nozzle Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't really like any of the boxes or nozzle holders I found. I wanted something minimal, quick to print and tidy.
- Ocena
- 4,754 / 5
- Polubienia
- 287
- Pobrania
- 1858
- Wydruki
- 66
- Wyświetlenia
- 6423
- Oceny
- 69
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
UPDATED May-23: New sturdier hinge design. Details below.
I didn't really like any of the boxes or nozzle holders I found. I wanted something minimal, quick to print and tidy.
This little box packs up to 15 nozzles closely together, prints in place with a hinge and a pressure clasp to stay shut. Easy.
I've uploaded two STL files, one with a 0.2mm gap for the hinge pin and another with 0.3mm. The 0.2mm is stronger, but if you printer's tolerances are a bit sloppy the hinge might get stuck.
Update: I've updated the model to have a pin-less hinge. These should be much more sturdy and less sensitive to print quality. Again, there are two models, with a 0.26mm tolerance and a 0.2mm tolerance. On a printer with great quality and dimensional accuracy, I would go for the 0.2 version, as the 0.26 on my printer feels a tiny bit wobbly.
Print instructions
Rafts: No
Supports: No
Resolution: 0.2
Print mode: Quality
Infill: 15%