Ender 3 S1 Pro retrofit centering spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to fit tightly on the OEM roller. No additional hardware required, except maybe a little two-sided tape.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 442
- Wydruki
- 8
- Wyświetlenia
- 2170
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE: I replaced the lock nut stl with the correct one. Thanks for letting me know.
This centering roller fits directly on the OEM roller on my Ender 3 S1 Pro. No bearings, bolts, etc.
I suggest printing the halves vertically as that requires no support. After printing, a small amount of sanding was required at the edges/corners of the printed model to flatten the mating surfaces (see photo).
This printed well at 0.2mm and 0.28mm on my E3S1Pro, the photos are 0.2mm. I used 3 walls + 1 alternate with 10% gyroid (connected) infill.
I used PLA, but be aware that different rolls of filament may have different shrinkage properties, so use caution if printing pieces from different colors.