1 / 4
Prusa caster top honeycomb with a guitar strap button — zdjęcie 1
1 / 4

Prusa caster top honeycomb with a guitar strap button

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This design adds a guitar strap holder to the top honeycomb, without the need to screw one on afterwards.

Ocena
0 / 5
Polubienia
11
Pobrania
32
Wydruki
0
Wyświetlenia
901
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

The prusa caster is a pretty cool design for a printable guitar. However, it is still missing strap buttons. One guitar strap is added to the top honeycomb piece (that's what this remix is for) and one strap is added to the top middle piece. However, the mk3+'s bed is too small to print the strap directly to that one. For that, I used the following remix:

https://www.printables.com/model/410999-prusacaster-hexagons-wstrap-mount-holes

Now, print a guitar strap button (the one that this model remixes) and bolt them together!

Printing the part may seem a bit challenging, as the strap button starts printing in mid air. I used regular supports to support the strap button, however, now that organic supports are out, I would suggest printing it with that. However, even with the traditional supports, as you can see in the pictures, the strap button prints quite well!

Tagi