Quick access modular hanging clips for writing utensils
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick access hanging clips, that are replaceable, for sharpies, exacto knifes, or expo markers.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
All you need to do is print what ever sized baseplate you need and the clips you need. They print in multiple parts so you can replace the clips if they wear out, want to change what is hung were, or break. Print everything vertically so nothing splits when inserting tools or clips. Depending on your printer the clips can be very stiff to insert and remove at first. This is to ensure a tight fit of the clips so they don't rattle and potentially break in the baseplate. Just slide them in and out a few times with pliers if need till it loosens up a bit. I used double sided tape to mount it. Let me know if you want any other sizes of base plates and clips, I'll do my best to make them!
Printed with .4mm nozzle, .2mm layer height
No supports needed
I recommend a brim for the baseplate