RC Crawler Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount designed to hold 1/10 RC rock crawler. Designed around Element Ecto and Element Sendero SE.
- Ocena
- 5 / 5
- Polubienia
- 107
- Pobrania
- 560
- Wydruki
- 0
- Wyświetlenia
- 3080
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a wall mount for 1/10 scale RC rock crawlers. I wanted to get my 2 crawlers off the desk. It was designed based on Element Sendero SE and Element Ecto. The idea is that the transmission mount will sit in the recess and the rails will fit between the tabs.
I printed the pieces separately and glued them together using a healthy amount of superglue. Print 2 of the rib files. You will need support on the end of the VehicleSupport file as it it cantilevered over the edge.
Please use at your own risk! My heaviest RC is my Ecto. It weighs 7 lbs. Also, you will need to use drywall anchors and/or mount into wall studs. I am currently using 50lb drywall anchors as that is what I had.
Thanks for stopping by!