WRX Sunglasses Space
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My son needed a space to place his sunglasses in his car.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1786
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
My son needed a space to place his sunglasses in his car. The coin panel below the centre console served no real use, but presented itself as a possible place to modify to store his sunglasses. The car is a Subaru WRX Club Sport 2006.
The coin storage area can be relatively easily removed. The surounding plastic was cut away with the Dremel and a new 3D printed enclosure was put in it's place. See photos for details. The new space allows sunglasses 150mm wide to be slotted in.
I hope you can find this print useful, too.
Print instructions
My print is made in PETG 1.75mm 3DFillies black filament, with 0.2mm layer height and 15% infill on a PRUSA I3 MK3S printer.