1 / 2
Hose Adapter_2.5inch(64mm) OD to 2.28(58mm) OD — zdjęcie 1
1 / 2

Hose Adapter_2.5inch(64mm) OD to 2.28(58mm) OD

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hose Adapter_2.5inch(64mm) OD to 2.28(58mm) OD Works for connecting a 2.5"(64mm) Hose to the Dust Deputy inlet

Ocena
0 / 5
Polubienia
2
Pobrania
32
Wydruki
0
Wyświetlenia
162
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hose Adapter_2.5inch(64mm) OD to 2.28(58mm) OD and 3.5"(90mm) tall
Works for connecting a 2.5"(64mm) Hose to the Dust Deputy with a 2.28"(58mm) inlet.
Their instructions list the inlet ID as 2 5/16 (58mm) but 5/16 is really .231 which is 58.6mm but the inlet is tapered.
 

Printed in Coex PLA mainly because I was low on Jessie PETG but that would have been my preferred filament.

20% infill

No supports

Tagi