SMD Component Storage with TearDropHole for improved hole clearance
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i added teardrop holes for easier overhangs and therefore better clearance in the hole. This way it should be easier…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 464
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
REMIX OF A THINIGIVERSE MODEL
i added teardrop holes for easier overhangs and therefore better clearance in the hole. This way it should be easier to put filament filament into the holes
If you have already printed the Standard version without teardrop holes and cant fit in a piece of filament, i have included some HexRods with different diameter which you can print and then use these instead of the Filament. Just try out which on works best and has a snug fit. I recommend printing these with Brim if you dont have absolutly perfect first layer
Category: Electronics