drip tray for washing machine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't have a suitable bowl to drain the water from around the lint trap in my laundry machine, so I printed one.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 386
- Wydruki
- 2
- Wyświetlenia
- 2311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't have a suitable bowl to drain the water from around the lint trap in my laundry machine, so i printed this trip dray.
You can adjust the size in the slicer, just change the X, Y or Z diameter. So it will match your laundry machine perfectly. The uploaded STL-file is 210 x 210 x 35mm.
Important: In order to get a bowl, the following settings in the slicer are necessary!
Infill: 0%
Top solid layers: 0
You set the thickness of the walls and bottom by the number of perimeters / bottom layers. I recommend using 5 perimeter layers and 8 solid bottom layers. (If you use a 0.4 nozzle and a layer height of 0.2)
Happy cleaning!