Powered Recliner Replacement Actuator Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement block for OKIN JLDQ-12B linear actuator. Part number: JLDQ.12.109.80
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 757
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
Replacement block for OKIN JLDQ-12B linear actuator.
Part number: JLDQ.12.109.80
After having this part break on both our chair AND half the couch... replacement actuator assemblies are $90 on Amazon, and the block is not available as a separate part.
Files included are the "original" style block, a slightly simplified version (less exterior detail) as well as a "thread test" part if you want check for tolerance and fitment before printing the entire part.
I ran this using Inland PLA+ but the original part was some kind of Nylon, so I'm sure that might be preferable for longevity.
I turned on supports, only for touching the build plate & blocked those around the edges, as the detail is small enough that it printed fine. You just need to support the threads in the center section.
Files included are the "original" style block, a slightly simplified version (less exterior detail) as well as a "thread test" part if you want check for tolerance and fitment before printing the entire part.