1 / 3
Adapter to mount 120/240 AIO to Fractal Torrent 180mm fan — zdjęcie 1
1 / 3

Adapter to mount 120/240 AIO to Fractal Torrent 180mm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a mount that allows you to mount a 120 or 240 AIO to the front fan(s) on a Fractal Torrent case

Ocena
5 / 5
Polubienia
12
Pobrania
145
Wydruki
0
Wyświetlenia
2368
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

I upgraded cases and realized I couldn't use an AIO with the Torrent case. So I designed a bracket to mount the AIO to the front 180mm fans. It seems to work well. 

I designed it to print with supports on build plate only. I would also recommend a brim to ensure good adhesion. 

To install it use fan screws and double check the heads fit through the teardrop holes on the 180mm side. Then install the screws on the 180mm fan but leave a gap for the adapter. Check the fitment to make sure it works. Next adjust the screws on the 180mm fan until you can feel a little resistance when installing and removing the adapter. Once that is sorted remove the adapter so you can mount the AIO to it. Finally you can place the assembly on the screws mounted to the 180mm fan. Done. 

Tagi