M-LOK Thumb Index
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thumb rest / index for M-LOK handguards.
- Ocena
- 4,625 / 5
- Polubienia
- 175
- Pobrania
- 978
- Wydruki
- 8
- Wyświetlenia
- 4228
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I saw the thumb index from UTG and I thought I could make something similar and it looks like it could be useful. So I made this simple design.
If you don't know what this does it's a piece to rest your thumb of the support hand for a more comfortable grip. Oh with it you'd also know your grip is at the exact location you want.
I mostly eyeballed the dimension of the thumb rest and it turned out surprisingly good. But obviously everybody's hands are different so I can't say it would fit well with your grip.
The dimensions of the screw holes were measured from these T-nuts (amazon.com/dp/B0895GGH7C). If your screws don't fit... I supposed you could enlarge the holes with a drill bit.
For practical use I print in ASA with 0.4mm nozzle and 0.08mm layer height for the fine details.
I've oriented the exported models the way I'd print them. You'd need supports.