Generic Air Rower flywheel magnet holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cylindrical magnet holder for the flywheel of a Concept2 air rower clone (https://www.aliexpress.com/item/10050023)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
This is a holder bracket for 3x3mm neodymium magnets (up to 6) that used with the [ESP Rowing Monitor project](https://github.com/Abasz/ESPRowingMonitor) to upgrade my generic air rower (actually a cheap Concept2 clone) with more accurate metrics.
The bracket is sized for this specific [rowing machine](https://www.aliexpress.com/item/1005002302662579.html) but I uploaded the fusion 360 file should anyone need to change some sizes.
This is a fairly easy print only tolerances may pose a challange. By design there is only 0.1mm tolerance on the magnet holder holes so they are tight fits (I did not want them to be glued in permanently).