Halved SquashBall Decoupler (Perfect for Bambulab X1C & P1P)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shells to make airtight halved squash ball decoupling feet
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 41
- Wydruki
- 2
- Wyświetlenia
- 833
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
(Full video)
I added tons of weight to my printer rack, but the X1C still shook everything when fully going at it. Printing on the prusa mini standing one shelf above was not possible while the X1C was running.
Decided to give the good old squash-balls a try.
My rack does not have enough room for full sized ones. Also, I suspected full balls to wobble just a tad too much.
The halfed solution turned out perfectly so far.
I glued the halves in with UHU Kraftkleber to fully seal each of them again.
Put them under the existing four feet and did a recalibration of the X1C.
Very very happy with the results. The vibrations do not transfer to the rack nor the floor any longer. I was not able to notice any degradation in print quality, it might even has improved a bit.
Update V2: Increased wall-thickness from 1mm to 2mm for increased strength.
Have fun!
Bambulab X1C Decoupled #noiseisolation #noisereduction #x1carbon #bambulab - YouTube