1 / 5
Yo I Heard You Like Words on Your Dogs... (Jumbo Collar Letters) — zdjęcie 1
1 / 5

Yo I Heard You Like Words on Your Dogs... (Jumbo Collar Letters)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

So I put words on the words on your dogs.

Ocena
0 / 5
Polubienia
43
Pobrania
205
Wydruki
0
Wyświetlenia
1227
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

JUMBO COLLAR LETTERS!!! (like those name bracelets) 

Make sure the most important information about your dog (or large cat) is easily visible with these fun, jumbo clip-on letters for your pet's collar. 60mm letter height.

Print with supports unless your printer bridges like Calatrava.

Individual letters available in the zip file, but there are also preset PrusaSlicer files with color change, supports, etc.

Leave a comment if you would like me to upload a version for your particular collar size, and if there are enough requests I will make it happen.

I may also make a version with smaller letters (though it won't be nearly as funny) for all you wordsmiths with limited collar space, comment with a request so I can see the demand.

*Collar must be laterally flexible (see assembly instructions).

3 available fonts:

(download the fonts from the links and add them to C:Windows:Fonts to use them in PrusaSlicer's lettering)

Growl (fittingly) - rounded, bordered: https://fontesk.com/growl-typeface/

 

 

 

DynaPuff - bordered: https://fontesk.com/dynapuff-font/

 

 

 

Bainsley - plain: https://fontesk.com/bainsley-typeface/

 

 

 

2 sizes: 

2.5mm x 20mm (~1/10" x ~3/4") for most 3/4" collars

3.1mm x 25mm (~1/8" x ~1") for most 1" collars

 

Print instructions:

Recommended to use supports on bed only, I found the snug support option in PrusaSlicer works best. There is still some bridging that occurs, but it is supported in the middle, and even if the surface is a little rough, it provides less slip on the collar.

Change filament at 15.2mm for the letters, 10.4mm for the heart and bone.

Print time: 

Letters: Average 45min (.3mm LH, .4mm nozzle)

Heart/Bone: ~25min (.3mm LH, .4mm nozzle)

Assembly instructions:

  1. Fold the edges of the collar into a U shape at the location you want the letter, make sure the outside face of the collar is the inside face of the U.
  2. Slide the gap of the letter over the arms of the U.
  3. Place your thumb on the bottom of the U and push, this should make the edges of the collar slide into place.
  4. If you are experiencing difficulty with step 3, do the following: Fold one end of the collar that's sticking out of the letter snugly around to the front of the letter, so as soon as it clears the groove it starts to flatten out. Then pull on the other end so the flat bit begins to slide into the groove.
  5. Repeat steps 1-4 for all other letters of ‘This dog is a big jerk wad but I still love her and give her all the treats’ (or whatever you want your ID to say)

Enjoy! :) And please post pictures of your tiny dogs with these - it would make my day.

Tagi