1 / 9
Ellen Ripley gun - some parts REMIX — zdjęcie 1
1 / 9

Ellen Ripley gun - some parts REMIX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I remixed some parts

Ocena
0 / 5
Polubienia
21
Pobrania
128
Wydruki
0
Wyświetlenia
900
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Some parts didn't fit together as I expected, or I didn't like them. 


body_strap_rung - to make the hang tighter and more secure (because you really don't want the strap to get caught at Con, the gun falls and the whole thing breaks) I used a purchased metal lug that I inserted into the body_strap_rung - if the gun is only going to be on display, you don't have to worry and print the original version of the tab


fuel_pin_valve_dial - I saw the work of other propmakers on the net and I liked the dial they had on their guns better


greebly_3_4 - too fragile, cracked when sanding, therefore added inner padding, now sticks to the gun mask even better


greebly_6 - too fragile, cracked when sanding, therefore added inner padding, now sticks to the gun mask even better


greebly_23 - likely to break when removing supports, added base for better gluing and printing, but still need to print with supports

 

greebly_34 - likely to break when removing supports, added base for better gluing and printing, but still need to print with supports

 

propane_holder_1 - no join of both circles - broke into two pieces when removed from pad, added larger inner edge and works

 

propane_mount - the mounting of the propane bottle reservoir seemed to me to be bulky and insufficient, so I modified the connecting part to make it fit better

 

trigger_mech_rear - rear trigger mech, which also functions as a magazine holder

 

trigger_mech_holder REAR - to make the trigger control functional on the rear side as well, I modeled a smaller version of the rubber band holder

 

tube extension - if you use a rubber tube instead of rods, an extension will come in handy, which you insert into the holes on the tube and then put the tube on the extension

 

front_emitter_sparkplug_wire_head - if you use rubber tubing instead of rods

Tagi