*Updated V2!* Plifter - 1lb Plastic Antweight Combat Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
*Updated to V2!* A relatively cheap and easy to build 1lb combat robot.
- Ocena
- 4,8 / 5
- Polubienia
- 115
- Pobrania
- 668
- Wydruki
- 5
- Wyświetlenia
- 5945
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Updated V2!
I've finally uploaded some long overdue changes to make assembly easier and make the robot more durable than before! Some Patch notes:
- Updated design to use all M3 bolts and nuts included in the linked BOM. (no more fiddly heatsets!)
- Redesigned upright structure to reduce gears slipping of vertical hits.
- New servo gear mates more securely and is easier to assemble.
- New switch placement allows drop-in replacement with Fingertech screw switch if desired.
- New printed wheel hubs transfer less energy to motors on hit. (Fewer broken gearboxes!)
- New fork designs.
Here is the list of parts needed:
- 4 x N10 1650RPM Motors (https://turnabot.com/products/high-power-n10?variant=40166099910721)
- 1 x Malenki Nano Combo Receiver and ESC (https://turnabot.com/products/malenki-nano-integrated-6-channel-triple-electronic-speed-controller-receiver-combo)
- 1 x Kingmax KM1203MD Servo (https://turnabot.com/products/kingmax-km1203md)
- 1 x 2S 300mAh LiPo Battery (https://turnabot.com/products/turnabot-300mah-2s-65c-lipo-battery)
- 1 x Fingertech Charge Jack (https://itgresa.com/product/switch-and-charge-jack/)
- 4 x Solarbotics tires (https://www.solarbotics.com/product/rt28x13)
- 4 x 3mm Shaft Collars (https://www.amazon.com/dp/B0CQ2NR3FC)
- Various Length M3 Bolts 4mm - 40mm (https://www.amazon.com/dp/B09YPV26KK/)
- 5 x Small zip ties (https://www.amazon.com/gp/product/B09PJ8L58G/)
If you are new to combat robotics or hobby RC in general, you will also need a compatible AFHDS2A transmitter like the Flysky FS-i6.
Some armor files need to be mirrored while slicing to get both sides.
TODO:
Add specific print profiles. For now, assume all the black parts are printed all walls Duramic PLA+, green/pink parts are Overture Super PLA at generic-ish 4 walls 15% gyroid.
Add assembly instructions. I filmed my last assembly, but it needs editing. Possibly a set of Cadasio instructions.
Make SCAR Kit compatible chassis for their slightly larger Lego wheels.