Spare Toilet Roll Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a project on making a spare toilet roll holder
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It is embrassing to find that the toilet roll on the holder was run out when using the toilet. Hence, I made this spare toilet roll holder to serve the need for storing one more roll.
In order to save space, the holder was designed to be hanged onto the original holder in order to hold one more roll. As such, the holder was consisted of two pieces of side support, one toilet roll support and two end caps.
For printing the project, it is quite straight forward. However, the end caps are recommended to be printed with five walls for durability considerations. Also, for easy printing (to avoid using supports in particular), the toilet roll support assembly needs to be glued togther with one toilet roll support and two end caps.
The GCODE files are attached for easy reference. The STL files are also attached so that users may slice their own GOCDE files according to their needs.
Thank you very much for viewing.