1 / 3
ACTAR 911 Infantry Airway Cap - Replacement
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement airway cap for the ACTAR 911 Infantry infant CPR training manikin.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 1155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement Airway Cap for the ACTAR 911 Infantry (infant) CPR training manikin. You can see a comparison of the original piece and this model in the photos.
Design notes
- The overall shape is faithful to the original piece, with some very minor adjustments.
- Many of the surfaces are chamfered for easier handling, since the thermoplastics we commonly print with are harder than the original part.
Printing instructions
- Due to the shape of this model, supports are required. I have provided two .stl files, one without any included supports (add your own in your slicer), and one with a custom designed support.
- Choose the .stl you'd like, and print as oriented. The file with included supports is designed for a 0.2 mm layer height.
- If you printed the file with supports, gently flex the piece and push the support away (press from the top; it will detach and fall out the bottom).
Cleaning and disinfection
- Use a disinfection protocol appropriate to the material/process you are using.
- If you are printing in PETG, you can refer to this Prusa knowledge base article: https://help.prusa3d.com/article/prusa-face-shield-disinfection_125457