Planetary Gearset 03
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is another planetary gearset I attempted after the first one (Planetary Gearset 02). I wanted to increase the…
- Ocena
- 4,6 / 5
- Polubienia
- 41
- Pobrania
- 258
- Wydruki
- 6
- Wyświetlenia
- 926
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is another planetary gearset I attempted after the first one (Planetary Gearset 02). I wanted to increase the number of planet gears to try and keep it aligned better (which worked) but didn't fix the problem that it's hard to hold the center ring and spin the outer ring. I added an index line to the inner ring so if you hold the outer and run the planets by putting a pen in one of them and spinning it around, you can see the sun ring spins much faster.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
20% to 100%
Filament: Filamentum Extrafill PLA Melon Yellow
Notes:
After printing separate each planet gear by putting a screwdriver or similar rigid rod into each planet and flexing it slightly toward and away from the center of the sun gear. That should break any bridging at the build plate layer and let the planets all run.
Designed in Solidworks 2018, using built-in ISO straight gear profiles. Once the teeth and pitch diameters were worked out, I used the "Flex" tool to twist each gear to give it the angled gear teeth, then mirrored the body to create the herringbone.
LibreOffice Calc was used to work out the number of teeth, pitch diameter, and twist angles.
Category: Mechanical Toys