Prusacaster Middle Amazon Leo Jaymz Tele Bridge 4 hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had to adjust for the Amazon kit. Apparently, each kit is different.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 290
- Wydruki
- 4
- Wyświetlenia
- 1867
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
Bridge holes and neck holes had to be moved for Leo Jaymz kit from Amazon. This is still a work in progress.
4-8-2023. The middle section is finished and printed. The bridge fits as does the neck.
I need to move holes in the Control piece and output Jack to fit the screw holes from the Amazon kit.
4-20-23 Finished build with the middle section and steel rods. The guitar sits neck heavy even with rods. Also using PLA the cold creep is minimized by the rods but still flexible enough to throw out of tune. I wouldn't suggest PLA for the middle section. Maybe someday I will try again but for now it plays and looks cool.
4-9-2023. Pickguard needs adjusting to fit the Amazon bridge. Also, I will be adding steel rods to help keep the center section from bowing. I will upload stl files as soon as I test fit.