Dagger Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have printed several daggers over the years and wanted to give them a cutting-edge home. I also added a very pun-ny…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 486
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
I have printed several daggers over the years and wanted to give them a cutting-edge home. I also added a very pun-ny line to it if you are so inclined.
Do not use it for real knives - it was neither designed that way, nor should sharp object be on display like that. Unless you are going for budget Knives Out.
I specifically designed the center slot in the back to hold the Skyrim glass dagger (https://www.thingiverse.com/thing:3048822). The rest is meant to be flexible.
Print Settings
Printer Brand:
Kingroon
Printer:
Kingroon KP3S
Rafts:
No
Supports:
Yes, organic supports recommended
Resolution:
0,2mm
Infill:
10%
Filament: PLA