1 / 4
Dual Z Belt Tensioner - Ender CR Neptune Kobra Aquila Gemini XY — zdjęcie 1
1 / 4

Dual Z Belt Tensioner - Ender CR Neptune Kobra Aquila Gemini XY

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Better synchronisation between the lead screws for improved walls quality.

Ocena
5 / 5
Polubienia
119
Pobrania
741
Wydruki
9
Wyświetlenia
5677
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This tensioner helps to maintain a good synchronisation between the two lead screws. That keeps the X gantry parallel to the bed during a print but also and especially between prints when the stepper motors are off. So the layers stay parallel as well.
 

With this tensioner, I have got much more consistent layer heights and the walls quality was improved especially when using thin layer heights.

 

Compatible Printers

This is a non-exhaustive list of compatible printers. This list was mostly done by inspecting the printers on pictures. So there may be some errors. 

Don't hesitate to post comments and makes for me to be able to update this list, thanks ;)

AnycubicCrealityElegooTronxyVoxlab
Kobra Plus*Ender-3 Neo Max*Neptune 3 Plus*Gemini S*Aquila D1*
Kobra Max*Ender-3 S1 ( Plus / Pro )Neptune 3 Max*Gemini XS*Aquila Pro*
 CR-6 SE / Max XY-3 SE* 
 CR-10 Smart ( Pro ) XY-3 Pro* 

* Not been tested.

 

Bill of material per tensioner

  • 1 x Ball Bearings 608 (8 mm x 22 mm x 7 mm)
  • 1 x M3 x 8 SHCS bolt
  • 1 x M3 T-nut (alternative : 3d printed part )
  • 1 x M4 x 16 SHCS bolt
  • 1 x M4 hex nut

 

Installation

Slide the tensioner from the center of the extrusion profil to the right (or left) to adjust the tension.

You can choose to place 1 or 2 tensioners depending on how much the belt needs to be tensioned.

NOTE - this tensioner could interfere with the extruder footprint.

I recommend you to test your max Z travel and to adjust your slicer profil and/or your firmware accordingly.

 

Print Settings

Material : PLA (or PETG, ASA, ABS if used in a heated chamber )

Supports : No

Resolution :  0.2 (recommended)

Infill : 20% (recommended)

Walls : 3 perimeters (recommended)

 

❤ Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest updates. 
If you wish to further help me to fuel future projects, consider buying me a coffee, I'm literally running on those! Every cup counts and is immensely valued. ☕ Cheers! 

 

Tagi