Sliding Tile Puzzle (100% Print-In-Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a completely print-in-place sliding tile puzzle. There is a numbered and non-numbered version.
- Ocena
- 4,5 / 5
- Polubienia
- 62
- Pobrania
- 493
- Wydruki
- 4
- Wyświetlenia
- 1890
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution
This is a completely print-in-place sliding tile puzzle. There are two .STL's, one with blank tiles and one with number extrusions. The tiles are unable to be taken out of the containment ring.
After printing go around to each tile and make sure it is fully separated from it's neighbors, the precision required is very tight in order to keep the tiles fully captive
Using Slic3r or equivalent software you can also do a filament swap to get different colored numbers on the tiles. You can also glue a picture to the front of the tiles and use an exacto knife to cut through the gaps to make a completely custom puzzle.
Feel free to modify all of the .stl's with attribution, and If you make one post a picture!