Pendant ocarina - 4 hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small 4 hole pendant ocarina. It is tuned for the c5 to c6 octave and can play 8 notes.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 347
- Wydruki
- 6
- Wyświetlenia
- 1336
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
This ocarina is a quick and easy print with no supports needed. It is designed to print on it's side as oriented in the STL. I've printed it with a 0.4 nozzle and a 0.6 nozzle and it sounded the same on each. I printed it at .2 layer height with 3 tops and 3 bottoms.
I've included two models: one with a string attachment point so you can wear it as a pendant and one without the attachment point.
The Design: To get it in tune, I tried doing the math, but ultimately I ended up carving the holes from the plastic to get the right sizes. I then converted that area to diamond shapes for the finger holes. I chose diamonds (really just a rotated squares) because they were the most reproducible shape to print, especially for the smallest hole.
You can look up 4 hole ocarina tabs and find easy to play tunes.