Surprise Easter Egg (breakable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handy easter egg model that you can put a surprise inside of.
- Ocena
- 5 / 5
- Polubienia
- 104
- Pobrania
- 1461
- Wydruki
- 2
- Wyświetlenia
- 4854
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution
A friend wanted to make customized breakable easter eggs so I got to work making this model.
Here is a break video showing how easily the eggs can be broken.
https://www.youtube.com/watch?v=MNePt8DNZMc
Specs:
- Printed on an Ender 3 V2.
- Sliced with Cura 5.3.0
- Low Quality (0.28mm)
- No supports
Surprise Easter Egg_Bigger Gaps.stl breaks easier but Surprise Easter Egg_Small Gaps.stl has a better finish.
You can place another model inside before slicing.
If doing so, I would recommend raising your internal model at least 0.2 mm above the inner surface of the egg and adding a custom support below it.
I've included Meggi_07.stl as a sample surprise keyring that can be inserted.
Alternatively, you can drop in candy or other small toys before the upper portion is printed.
I haven't tested it at bigger sizes but it should be just as breakable if scaled up in your slicer.
Feel free to leave any makes or comments below and Happy printing!