1 / 5
Nanotech Light Plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a back plate to place under your Light switch plate to give it some cool decor.
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 231
- Wydruki
- 3
- Wyświetlenia
- 1326
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (128)Powiązane
This is a back plate to place under your Light switch plate to give it some cool decor.
Print instructions
Category: Decor Summary
This is a back plate to place under your Light switch plate to give it some cool decor.
Print Settings
Printer: Mk3S
Rafts: No
Supports: No
Resolution: 0.4
Infill: 100
Notes:
Do Not print with any Skirts. Be sure to have a heated bed as the Rolling is real with something this thin
Post-Printing
Single gang Switch
Triple Gang Switch (Just cut up a few of them and hot glue them on)