Luke Skywalker Lightsaber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Luke Skywalker's lightsaber with pressable buttons. 100% 3d printed* *with glue.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 177
- Wydruki
- 0
- Wyświetlenia
- 1310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
I printed it and it works with PLA. I don't know about other materials.
All models are in thier correct orientation, do not change this. (They are fine just as they are.)
Do not use supports unless noted.
I have included 3 files for the assembly:
- A .stl file (no anim)
- A .blend file with animation
- A .fbx file (in the zip folder) with a animation
It was designed to be glued together. Superglue works fine. Just don't glue the springs. The springs are the little curly things.
Printing Notes:
“part7” should be printed with gyroid infill or similar. I tried printing it with grid infill and It failed multiple times.
For “part19” just cut it, put it through the hole and glue it back together. That's what i did.
