Bambu Reusable Spool (light / cleaned: 1 kg)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Bambu Reusable Spool with focus on material efficiency, robustness and a clean look.
- Ocena
- 5 / 5
- Polubienia
- 200
- Pobrania
- 2422
- Wydruki
- 11
- Wyświetlenia
- 6813
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
You like a clean look and hexagons? This is the place for you :)
---
Features & Changes
- fully compatible and dimensionally identical with original spools
- removed material for faster and resource friendly printing
- there are no supports needed
- removed holes and the label (optional version with label included)
- the faces of consist of a 6x1 mm hex grid (because Hexagons are the Bestagons)
- hex-spokes, for a more rigid spool
- few optimizations for easier printing (cleand up some clunky STL edges)
Variants
- 1 kg Bambu Reusable Spool (this model)
- 250 g Bambu Reusable Mini Spool
- 100 g Bambu Reuseable Micro Spool
Printing
- straight forward lay them flat on the face
- PETG, ASA or ABS recommended
- print them with the BBL Standard or Strength profile
- no supports, brim or anything needed
- concentric top and bottom layers recommended
- ironing of all top surfaces optional (takes ages)
- you need one of each piece
FAQ
why did you remove all the holes?
Because i don't need them - i use filament clips and avoid sticking the filament though any holes. it bends the filament and this can cause problems if you feed it though PTFE couplers - also, the whole frame of the spool is full of hexagonal holes :)
if you still want an original spool with more holes, there are plenty of remixes of the original spool on printables which are compatible
how much lighter and faster?
with BBL 0,2 mm Standard profile you'll save about 25 % of material