Mirror Holder for Parking Assistance (95mm Diam)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3 part design for a 95mm convex mirror that allows me to see the front of the car when parking.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a 3 part design for a 95mm convex mirror that allows me to see the front of the car when parking in my tight garage. You will probably have to design/hack a replacement for the Part c piece to suit your placement need. (mine was designed to hook over the folded table tennis table that is stored in front of the car.)
The 95mm mirror I used was from Ali Express (Item 4000108883043 ) and just clips into the mount. The mirror clip part uses 3mm x 10mm screw with a thread inset in the clip. The hinge uses a 4mm bolt and nut to fix to the arm.
I used PETG at 0.2mm layers with a 0.4 nozzle. You will need some supports for the parts.