1 / 1
Anti-Spill Cat / Dog feeder — zdjęcie 1

Anti-Spill Cat / Dog feeder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anti-spill cat / dog feeder

Ocena
0 / 5
Polubienia
11
Pobrania
39
Wydruki
0
Wyświetlenia
283
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Public Domain

 * UPDATE JUNE 2023 *

The first file I uploaded had no overhand (anti spill) on it. This has now been changed, Please see updated file.

Anti-spill cat or dog feeder. I guess you could use it for water (if printed with PETG etc.) however I've not tried this. Recommended settings of 3+ walls, 20-40% infill, PLA. Raft beneficial if you've don't get good adhesion, however not mandatory.   Supports required for overhand. 170mm at the base x 70mm H. Rescale to suit bigger / smaller animals. Photo shows original design. 3 years old, sorry for the poor photo!

Tagi