Lab Bench Power Supply Enclosure (LTC3780)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
because I didn't find an appropriate enclosure for my PSU project, I decided to make my own.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 627
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
because I didn't find an appropriate enclosure for my PSU project, I decided to make my own. fits really nice but printing takes a while.
had some issue during print with ABS warping, but finallay fixed it some ABS glue - hence the enclosure surface isn't perfectly smooth. therefore I would recommend printing with PLA instead of ABS
printed the upper part upsidedown with supports in order to have nice cut-outs.
instructions & BOM: https://youtu.be/wI-KYRdmx-E
thx to @GreatScottLab for the instructions
Print instructions
Category: Electronics Summary
because I didn't find an appropriate enclosure for my PSU project, I decided to make my own. fits really nice but printing takes a while.
had some issue during print with ABS warping, but finallay fixed it some ABS glue - hence the enclosure surface isn't perfectly smooth. therefore I would recommend printing with PLA instead of ABS
printed the upper part upsidedown with supports in order to have nice cut-outs.
instructions & BOM: https://youtu.be/wI-KYRdmx-E
thx to @GreatScottLab for the instructions
Print Settings
Printer: DIY I3 MK2
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 15%
Notes:
printed in ABS - had some issues with ABS warping... I would recommend using PLA.