1 / 13
Motorized 2 Post Lift for 1/10 RC Cars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a motorized 2 post car lift meant for 1/10 scale RC cars. Still a WIP as I still improve it. Parts needed: M3…
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 245
- Wydruki
- 2
- Wyświetlenia
- 2665
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (117)Powiązane
This is a motorized 2 post car lift meant for 1/10 scale RC cars. Still a WIP as I still improve it.
Parts needed:
- M3 nuts / bolts, countersunk m3 for bottom plate.
- 3 Position Switch
- 18650 Battery and charging board (or substitute for 9v battery)
- Mini Gear Motor 100-150RPM (https://www.amazon.com/gp/product/B083GLYZCK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
- Motor coupler 3mm to 8mm https://www.amazon.com/gp/product/B08H24YHCW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- 2x M8 threaded rod / nut
Assemble as shown in the fusion model. There are two styles of lift arms, the reinforced / long short arms are the better option for heavier cars.
Current issues: with heavier RC cars the lift wobbles quite a bit while going up. Need to find a better motor solution.
Category: R/C Vehicles