Ender-7 Print Head Hose Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent the wires connecting the print head with the rest of the machine to be caught in the belts.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The wires connecting the print head with the frame are bundled in a flexible hose. Due to the way the Ender-7 is packaged the hose is pressed down to the point where it can be caught in the belts.
This shroud provides just enough support for the hose to always stay above the top cutout, while still allowing full reach of the print head.
Print and Assembly
Print the model twice. Then assemble it around the hose and fix it with two self-tapping M2.5 screws of about 5-8mm length.
The top cover of the printer is plastic. Therefore, you cannot fix the shroud with magnets. But lightly clamping it around the hose is stable enough for me.
Tweaks
If your Ender's hose is more/less deflected, you can change the bottom_height. I use bottom_height = 10mm that is just a bit low. Therefore, I publish the model with 15mm. The cup is 15mm height, too.