Meade 8" Starfinder carrying handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed an easy way to carry the OTA for my Meade Starfinder telescope.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
I needed an easy way to carry the OTA for my Meade Starfinder telescope. There are five parts to print: 2 X bottom strap, 2 X top strap, and 1 X handle. The handle attaches to the top straps using four M4 X 12mm flat head screws and nuts, and the top straps attach to the bottom straps using four M4 X 16mm pan head screws, washers, and nuts.
This is sized for my homemade Dobsonian mount, but I should be able to thread the straps from my vintage Starfinder equatorial mount under the handle.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.24mm
Infill:
20%
Filament: Inland PLA+ Black
Notes:
The handle can be printed without supports, but you will need to rotate it 90º lay it on its side. I also had to rotate it 45º to get it to fit on the build plate.
Category: Physics & Astronomy