1 / 6
Python Pro-Clean Gravel Washer Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cut the tube where you want, move the pump into the middle of the hose and use this adapter to connect the pump to hose.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This adapter lets you move the pumping blub anywhere along the hose. You just take out the pieces from the part that came with the pump and put them into this piece. Keep the ball and the green retainer ring from original and pop them into this adapter.
Designed specifically for the “Python Pro-Clean Gravel Washer”
I had success printing with the narrow side down on a raft with no supports, I did have the “experimental bridging" enabled in Cura. 100% infill