Pegboard Bin Accessories: Adapter and Divider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter will allow you to mount the bins on standard 3/16" thick pegboard with 1/4" holes on 1" centers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
We have tons of these pegboard bins but they're almost useless because the hooks on the back are too short for 3/16" pegboard. This adapter will allow you to mount the bins on standard 3/16" thick pegboard with 1/4" holes on 1" centers. The bins lie flat on the board and are held securely. The optional divider doubles the number of bins.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
20%
Notes:
Here's the assembly sequence for the adapter and divider:rnrn1) Snap the adapter onto the bin hooks so that the hooks are visible in the recesses on the back of the adapter.rn2) Insert the pin on the back of the divider into the hole in the adapter.rn3) Snap the front of the divider over the lip of the bin.rn4) Mount the assembly on the pegboard.
Category: Containers