Periscope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Child's toy periscope made from 2" PVC pipe.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 636
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This was inspired by https://www.thingiverse.com/thing:1027744
This is designed for the mirror shown in the photo and available here: https://www.amazon.com/gp/product/B000RZQI68/
If you don't use this mirror, you may have to use a different approach to attach the mirrors other than the clips used in this design.
The end pieces are a tight fit for 2" PVC pipe, so some sanding may be necessary.
UPDATE 6/29/18: I designed a different, more secure clip for the mirror. See the photo. This will only work with the acrylic mirror specified.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
No supports needed. I set my hot end at 205C and the print speed at 40 mm/S on my ANET A8. Printed in PLA
Category: Toys & Games